logo
Ana sayfa ÜrünlerÇapraz Makaralı Rulmanlar

RB12025 Crossed Roller Slewing Bearing Inner Rotation 120mm ID x 180mm OD x 25mm Width

Sertifika
Çin Wuxi Handa Bearing Co., Ltd. Sertifikalar
Çin Wuxi Handa Bearing Co., Ltd. Sertifikalar
Ben sohbet şimdi

RB12025 Crossed Roller Slewing Bearing Inner Rotation 120mm ID x 180mm OD x 25mm Width

RB12025 Crossed Roller Slewing Bearing Inner Rotation 120mm ID x 180mm OD x 25mm Width
RB12025 Crossed Roller Slewing Bearing Inner Rotation 120mm ID x 180mm OD x 25mm Width RB12025 Crossed Roller Slewing Bearing Inner Rotation 120mm ID x 180mm OD x 25mm Width RB12025 Crossed Roller Slewing Bearing Inner Rotation 120mm ID x 180mm OD x 25mm Width RB12025 Crossed Roller Slewing Bearing Inner Rotation 120mm ID x 180mm OD x 25mm Width

Büyük resim :  RB12025 Crossed Roller Slewing Bearing Inner Rotation 120mm ID x 180mm OD x 25mm Width

Ürün ayrıntıları:
Menşe yeri: ÇİN
Marka adı: HDBB
Sertifika: ISO9001 CO GB
Model numarası: RB12025
Ödeme & teslimat koşulları:
Min sipariş miktarı: 1 adet
Fiyat: USD or CNY by Negotiation
Ambalaj bilgileri: Tek Renkli Kutu / Endüstriyel Ambalaj
Teslim süresi: 5-7 iş günü
Ödeme koşulları: T/T , Western Union, CNY, L/C görüşte

RB12025 Crossed Roller Slewing Bearing Inner Rotation 120mm ID x 180mm OD x 25mm Width

Açıklama
Özellik: Çapraz takım Model: RB12025
Mühür tipi: açık veya UU Ağırlık (kg): 2.62
Malzeme: Krom Çelik GCR15 Kesinlik: P5 P4 P2
IKO: CRB12025 NSK: NRXT12025
Vurgulamak:

gear crossed roller bearings

,

P5 crossed roller bearings

RB12025 Crossed Roller Slewing Bearing Inner Rotation 120mm ID x 180mm OD x 25mm Width

 
Type of guide Roller
Space retainer Yes
Material GCr15
Standard lubrication method    Grease lubrication
Oil hole Yes
Sealing Oil seal at both sides
Radial clearance CC0, C0, C1
Rotation accuracy P5/P4
Working temperature -20℃ ~ 80℃
RB12025 crossed roller bearing features:

1. Integrated inner ring with separable outer ring, clearance can be adjusted.

2. Sustain radial, axial and moment loads at the same time

3. High running accuracy supplied with normal clearance, little clearance or even under a pre-load

4. Stable rotation, spacer retainer prevents rollers from skewing, thus eliminates friction between rollers, and avoid increasing of the rotation torque

 

RB12025 cross roller bearing installation instructions:

 

Cautions: For crossed roller bearings with split outer ring, when the rigidity of the mounting parts is not sufficient, stress concentration will occur at the contact area between the rollers and raceways, and the bearing performance will be deteriorated significantly.
Therefore, it is necessary to carefully examine the rigidity of housing and the strength of fixing bolts when a large moment will be applied.
 
1. Before installation, please clean bearing bracket, shaft, or other components, make sure there is no burrs or rough edge.
2. Fix the inner and outer rings in the axial direction by using fixing plates, etc.
3. Slightly loosen the fixing bolts of bearings outer ring during mounting.
 

İletişim bilgileri
Wuxi Handa Bearing Co., Ltd.

İlgili kişi: Ms. Marilyn Zhang

Tel: +86-17312783296

Faks: 86-510-8260-9866

Sorgunuzu doğrudan bize gönderin (0 / 3000)